Jonathan Swift and Piers Paul Read Essay

Cannibalism is the last taboo. In ‘Alive’ and ‘A Modest Proposal’ Jonathan Swift and Piers Paul Read approach the subject with completely different purposes in mind. What do you consider to be the purpose of each author, and say how he achieves this? A Modest Proposal is a scathing attack on the economic oppression of the Irish by the English. During Swift’s lifetime tremendous suffering was caused by English practices in Ireland. However, it is incorrect to say that cannibalism is the theme of ‘A Modest Proposal. ‘ Swift was a Protestant writer in Ireland at the time of The Great Potato Famine. The article is a clever satirical device to draw attention to the plight of the poor. He infiltrates the opposition, the rich Protestant landlords, in order to put their torturous ideas to ridicule. Swift attacks his own Protestant, English community by creating a narrator who considers himself a reasonable and compassionate character, but one who combines a repulsive anti-Catholic bigotry, with a ‘modest’ proposal, that is, rather, a ‘final solution’: he, the narrator, advocates cannibalism as a means of countering Irish Catholic poverty abortion, and the high birth rate. The narrator, in a frighteningly rational and level-headed tone condemns the English for being inhumane, the Irish for being passive, the speaker for being morally blind, and the reader for accepting intolerable situations in the world around him; for this piece was accepted and believed by many, at the time. On the other hand, Piers Paul Read, in his biographical ‘novel’ ‘Alive, rather than indirectly giving answers to a problem, asks questions. He tells of the experiences of the survivors of an Andean plane crash in 1976, who, in the remoteness, and the harshness of their environment, the lack of a consumable source of food, and the quickening exhaustion of their own limited amounts of chocolate and wine, have no where to turn except, in their desperation, to eat the meat from their fellow, dead, company. They have only their plane’s wreckage as shelter, which has come down from 14,000 feet. Both literary pieces, although their purpose, style and audience are different, jolt the reader out of their complacency, and encourage them to think of things they thought weren’t necessary to be thought about! However, it is necessary to understand that the two texts have been written hundreds of years apart, and society, of course, has evolved. Swift has reached out across the religious and ethnic divide to champion the ignorant, impoverished Irish Catholics. The bigotry of Swift’s narrative is so convincing and grotesque, that Swift himself is sometimes mistaken as his narrator, an anti-Catholic bigot! On the contrary, Swift’s essay harshly attacks the ‘Christian’ commitment of Ireland’s wealthy Protestant absentee landowners, and his unflattering ‘cannibal’ is made in their image. P. P. Read meanwhile, attacks not the opposition, but gives a balanced and meaningful account of the plane crash and the tales that followed, and examines the human spirit to stay alive, and questions what is ‘civilized’ and ‘human. ‘ Yet, simultaneously, Read, almost in the opposite of Swift, advocates cannibalism. Read turns the views of cannibalism as a taboo on its head. Rather than associating it with savagery and being primitive and irrational, he questions logic, and seems to state that the ban is the primitive thing, that is not based on reason. In one paragraph alone, he writes, â€Å"we grappled with emotions,† and â€Å"we did not think it wrong† twice. While Swift attacks the Landlords by linking their greed to their â€Å"devouring† of the Irish Catholics, and satirizes cannibalism to the extent that it is no longer seen as ironic, only distasteful, Read, using a character ‘Canessa’, reasons cannibalism out. He talks of nourishment and energy, and of course, eventually wins his company. Their decision is based on logic and reason, and the ability to use these makes us civilized. Although I do not feel that Swift’s narrator’s views are plausible, Read using a variety of effective techniques, convinces the reader. Swift shows how the English projected their own blame onto their victims- destitute Irish Catholics, that, Swift suggests, have been ‘cannibalized’ by the rapacious greed of absentee landlords. Swift is hoping to shame them into being more compassionate. However, as what happened when I read it for the first time, because Swift and his narrator are so tightly intertwined, readers often emerge from their reading, confused, perhaps unable to take in the implausibility of his case.

Change Management Report

Through an extensive range of skills and experience, the A-Belch Group has significant engineering and design capabilities to provide a complete and bespoke first class engineered solution from design to manufacture. Electrical and Mechanical engineering excellence Bespoke design solutions New product development programmer with continuous testing and development Quality design software enabling precision design and manufacture Continuous The Group incorporates HAD Lighting, A-Belch Hazardous Area, MAP Solutions, Electrical Engineering and Industrial Connectors.The extensive product portfolio includes the HAD Hazardous area lighting range, hazardous area enclosures, witchery, electrical distribution panels, electrical accessories and innovative modular building service solutions. The Group is an established supplier to the UK and international petrochemical, energy, rail and construction markets. With over 25 years' experience in the energy sector, A-Belch excels in quality, price an d delivery and after sales support.My role within the organization is to plan and manage the production of the Had cell. A-Belch is SISSIES :2008 accredited – see attachment 1 . Part of my role is to ensure the product we manufacture is of a high quality and tests the SIRS certification requirements. Due to the highly hazardous environments our products are used in we must ensure all shop floor operatives follow controlled drawings and SOPs for each build stage. See attachment 2 for controlled drawing. Attachment 3 is an SOP that is used by shop floor operatives.The department strives for continuous improvements and all staff are encouraged to offer their opinions to develop the department further. It is important that the department continuously improves in its working practices and procedure to keep up with a growing demand for our product and changing market place. As the company is ISO accredited the quality management systems have been prepared to BBS EN ISO 9001 :2008 a nd ISO/ICE 80079-34. My department manufacture products that are certified explosion proof lighting for hazardous area.All products are TEX and ICE certified and due to this a high level of quality is required during manufacture. All products are built to drawings which have been produced from certification drawings issued to SIRS the certification body. Without SIRS certification and approval no products can be manufactured. On each drawing is a list of components required is listed for the build. Along with the manufacture drawing a wiring diagram is supplied and a works instruction for the product. All finished goods are signed off by the production supervisor after being inspected.Each build has a check sheet with stages of each Job that need to be complete and signed off by the relevant operator, these are then kept and filed for future reference and can be used if goods are returned due to a quality issue relating to the build as I am able to identify which operator manufactur ed the unit and apply the appropriate action or complete refresher training. Identify a change that is required identify a change required in the workplace and explain the potential benefits of this change to the organization.In order to identify the factors that may require the company to change I have conducted a SOOT analysis – See below. STRENGTHS Growing company New product design Influential in the market place Loyal customers Dedicated staff Repeat business Competitive products USPS Team moral Opportunities Future Product development Supplier reviews – current changes needed to our supply of major components Additional business Current BOO items moving to manufactured itemsFactory expansion Increase in current output up to millions – new factory expansion WEAKNESS Health and Safety policies Environmental policies Lack of hazardous waste disposal Lead Times Manufacturing build issues High failure rate on some products Succession Management Competitors New products released to market by competitors Supplier price increase Market change Double dip recession Previous product quality issues From the SOOT analysis I have identified a change needed to our current health and safety procedures relating to our potting machines.Changing our current potting canines and process this will reduce down time and lead times, reduce annual cost, increase additional business and add to the growth and success of the department which will allow the company to develop in line with changes in the market place. Currently both potting machines run on a manual fill system where by each operative using the machine has to fill each hopper up by hand. In order to do this they need to stand on ladders and fill each hopper.The approve. Weight of both the activator and base is KEG each. The activator is a harmful substance which can irritate the skin an eyes. Correct PEP is worn by each operative; however there is always a risk of both the activator and base splash ing the individual. Manual handling is also a concern as the operative must climb onto step ladders carrying the base/activator to fill the hopper. Handling and risks to each operative can be avoided by moving to an automated bulk feed system.By moving over to the automated system the health and safety risks will be reduced significantly as there will be no need for each individual to manually fill each hopper. The automated bulk feed system will be installed for both potting machines and will insist of twin pneumatically operated double acting diaphragm pumps with dip tubes and four off outlet hoses up to machine mounted reservoirs. Electronic high- level sensors will be fitted to each reservoir to automatically call-off material from the supply drum on demand and stop when the reservoir is full.Pneumatically actuated ball valves will also be fitted onto each reservoir. Approve. Cost for this fitment EH,386. O + vat (inclusive of control box & on-site labor to fit) The proposed mov e over to an automated bulked system for both machines will: Reduce down time Reduce lead times Improve Health and Safety Improve potting procedures Reduce cost Reduce the amount of space needed to store the potting compound Reduce waste There will also be a cost saving to the company of approve.EH,81 5 per annum based on previous usage. This is due to the unit price of the potting compound being reduced by moving over to large KEG drums. Planning and monitoring the change State the objectives of the change in order of their priority. At least one must be a SMART objective. Prepare an action plan for implementing the change. Explain the technique you would use to monitor the achievement of the primary objective. The objectives of the change are as follows:To purchase and install automated bulk feed system within stated budget week commencing 16th September 2013 To have all shop floor operatives trained on the safe use of new equipment by 30th September 2013 Priority: 1) Health and S afety Improvements 2) Reduce cost 3) Reduce down time 4) Reduce manufacturing lead times 5) Improve potting procedures waste The above has been identified by conducting a SMART analysis Specific Implementation of bulk feed system for both potting machines What: What do I want to accomplish?Improvements to health and safety of shop floor operatives Cost saving – see below. Why: Specific reasons, purpose or benefits of accomplishing the goal. Reduce down time Who: Who is involved? Potting Machine Supplier – Meter Mix Potting Compound Supplier – Greenfield Polymers Production Manager – Me Floor Manager – SST Handmaids Shop floor operatives Divisional Director – Bob Scott Chief Executive – Brian Trench Where: Identify a location. New Had manufacturing facility Which: Identify requirements and constraints.Proposal of the change and cost savings/payback and benefits will have to be presented to higher management Upfront cost needed Current stock may be an issue as we use KEG drums and not KEG – need to identify if we can use current drums or swap with supplier for larger ones Identify space needed – this could be an issue. Will we have enough space for the bulk feed system in the new factory? Measurable How much? How many? Two machines will be needed How will I know when it is accomplished in 12 months' time when cost savings can be recorded Achievable How: How can the goal be accomplished?A report will need to be drafted up to highlight the benefits Installation will be done by Intermix Training of all shop floor operatives will be complete by the Floor Manager Relevant Does this seem worthwhile? The upfront cost is expensive, however the benefits the manufacturing cell and cost saving the company will gain outweigh the cost There is also a payback time due to the cost saving of the potting compound Is this the right time?Yes, the changeover is needed to reduce downtime and to allow output to increase C ompletion of the new factory extension will be the best time to implement this Are you the right person? As the Production Manager for the department I am responsible for the improvements to the department Time Based When? Implementation/installation – September 2013 What can I do six weeks from now? Sign off from Director Arrange Meeting with potting machine supplier to get the ball rolling Arrange meeting with potting compound supplier to inform of change What can I do today?Prepare report for Director of the benefits and cost of the bulk feed system In order to proceed with the change I have prepared an action plan detailing the stages I will need to work through in order to implement the change. Action Plan: Date of activity 1) Supplier Meetings Potting Machine – Meter Mix Advise on how the bulk feed system will work Discuss Cost Delivery and installation date to be agreed Discuss Training of staffPotting Compound – Greenfield Polymers Cost of KEG drums Can current KEG drums be used on bulk feed machines December 2012 2) Prepare report for Divisional Director Highlight cost saving Payback Benefits January 2013 – See attachment 4 3) Sign off by Divisional Director and Chief Executive January / February 2013 4) Supplier Meeting Agree options Discuss payment options Agree installation date April 2013 5) Raise purchase order and send to Meter Mix September 2013 6) Discuss with Floor Manager and add new location to new factory floor plan June 2013 7) Implementation/limitations w/c 16th September 2013 ) Staff Training Include in training matrix for all Shop Floor Operatives Tool Box Talk to be auctioned SOP to be updated 9) Stock change over January 2014 10) Record cost savings monthly Monthly spend and usage Compare finding against previous 12 months sales Record findings in a spread sheet In order to monitor the achievement of the primary objective I would monitor the monetary value of the activator and base per month based on the u sage and compare this against previous months before the new bulk feed system was implemented. This would be recorded in in a spreadsheet which I would design. The health and safety of each member of staff using this equipment is vital, however the improvements to the health and safety is difficult to manage. In order to ensure highlighting the differences between the two machines relating to health and safety. I would also perform a questionnaire with the operators using the machine to record feedback on the improvements to health and safety.Implications of the change Explain the possible financial effects of the change on the organization, Explain the possible effects on people inside the organization Identify any potential barriers to change and suggest practical ways of overcoming these In order to commission the bulk feed system there is an initial outlay of EH,386. O, however this has a payback time of 43 months after which the company will save approve. EH,81 5 per annum on p otting compound based on current usages. If I factor in the saving in down time on the factory floor this equates to a saving of 0. App per 25 KEG drum so therefore the payback time will decrease to 30 months.Even though there is a financial out lay the improvements to health and safety outweigh these massively. There will be a staff training exercise to complete with each Shop Floor Operative and raining to be received from Intermix who are installing the potting machine. The training will be given by the Shop Floor Manager to each staff member and a tool box talk will be completed. Future stock of the potting compound will have to be managed differently so training will need to be given to the department buyer as to how she will manage this. Attachment 5 shows the team update that was sent to inform every one of the status of the bulk feed system and update the buyer on how she is to manage stock Sty and orders.Discussions with Greenfield Polymers have been made by me in order to inform them f our current stock Sty's and discuss when the change over to KEG drums will take place. The final batch of KEG drum stock needs to be purchased from our supplier first before the changeover happens. See attachment 6. Currently the activator and base are purchased on one part number and ordered in a 5:1 ratio. In order to simplify this I have created separate part numbers for both components which after discussing with Greenfield Polymers will make ordering and consumption of stock more manageable and straight forward. Attachment 7 shows the price breaks for both the activator and potting compound.By creating separate art numbers AL 10049 – Base and ALLELUIA – Activator will also allow us to manage the stock more efficiently when stock takes take place as each individual item will be counted separately. The biggest barrier I will need to overcome will be convincing the Had Director and Chief executive that this change needs to happen and the positive impact it will have benefits to the organization and people within it and the cost saving this change will make. This should suffice as evidence the system is needed and the benefits this will have to the team and company. See attachment 4. This report will be presented to he Had Director and the main objectives discussed.Communicating and implementing the change Identify who needs to know about the change, describe how you will communicate with them and explain why it is important to communicate the change to them. Explain how you will continually improve once the change has been implemented. Explain how you will involve your team in doing this, and identify which tools or techniques you could use and how you would evaluate these improvement activities. The Had Office team and Shop Floor Operatives need to know about the change as there are action points for some staff members. They will be made aware of the commission of the bulk feed system via email and any questions they have will be discussed. Attachment 5 shows one of the updates I will send to the team making them aware of the commission date and stock management.Once the bulk feed system has been commissioned an email will be sent with photographs of the bulk feed system and the improvements this will make to the team and Production Department. This email will be sent to the Office team, Floor Manager and Had Director. The Health and Safety Manager will also be included in this email and made aware of the change as the improvements to Health and Safety f Staff members is quite significant. Once the change has been implemented it is important to review this in order to improve the process. Some areas that I would review would be the following: Improvements to equipment – I would contact Intermix who installed the machine to see if there is any additional equipment that could be bought to reduce down time further.

Examine, analyze and explain violent childrens programming from a Research Paper

Examine, analyze and explain violent childrens programming from a content analysis perspective as it relates to network shows su - Research Paper Example The extent of violence and the contexts in which it occurs has been consistently high over the years and has been rising. This essay examines, analyzes, and explains violent children programming from a content analysis perspective as it relates to network shows such as Nick, Disney, and Toon. Continuous watching of television may manipulate viewers' ideas of what the daily world is all about and even induce some violent behaviors in children by changing their general mindset about violence. The media's power to shape perceptions and attitudes is thus questionable. Certain scenes in children programming such as cartoons where animated characters are continuously run over or thrown from the higher grounds but remain dead for a while portrays death as temporary. At times, bullies and violent characters are viewed as heroes thus instilling the mindset in children (Leonard & Christy 78-82). The children’s cartoons are some of the highly violent TV programs that are frequently aired by most TV channels. Unfortunately, the innocence in children is more exposed to violence than the adults by frequent airing of violent scenes in children programs than adult’s programs. Interestingly, the violent acts in the children programs are usually portrayed in a way that authenticates violence by making the actions either funny or acceptable. When either a child or an adult views a violent act, there may be unpleasant effects that may either be long or short term on the viewer (Leonard & Christy 78-82). An exposure to media violence especially to a young child has tremendously strong impact on an individual that may make the child develop very aggressive and violent way of life when he grows up. It is therefore very risky to allow a child to be exposed to such kind of risky media content (Brocato et al. 99-102). The contentious issue is how does the TV violence affect our way of life, attitude and even behaviors yet it is just a matter of just watching a mere materia l. Many grownups are always glued to their TVs in the evening or over the weekends in the name of watching a favorite soap opera. Seemingly, TV programs are one of the worst addictions, which may even literally steal our time and most significantly totally change our mindset irrespective of our age or sex. Most people have postponed doing some very important tasks in the excuse of watching a favorite TV program. It is therefore true that what a person listens to and watches can suddenly change an individual’s style of leaving either regularly or occasionally (Facts for Families, n.p). During the stage of development, children should adopt a way of life that is moral and acceptable to the society by guiding them on what they should watch and listen. What is instilled on a child’s mind while growing can either strengthen or weaken after sometime. An activity or an organ changes its task to adopt to the function that is routinely used as explained in use and reuse theory in biology. This same theory applies to the content of a program watched and the attitude change of the individual because of the program’s content. It is therefore obvious that when children watch violent movies, they will eventually adopt violent behaviors. The ultimate behavior of the child is further strengthened by previous experiences and societal influences (Leonard & Christy 78-82). Disney Films Disney films are several movies released by the Walt

Term project Essay Example | Topics and Well Written Essays - 2000 words

Term project - Essay Example In our classrooms, the power outlets available are few in number and their location on the room walls are not accessible from the seating positions of most of the 20 to 30 students in the class. To provide students with the possibility of extended use of smartphones or other computing devices in the classroom, we have examined several possible solutions to the problem of providing power outlets at each chair or desk. One convenient and practical solution is to provide external battery packs clipped to each chair / desk in the classroom to which the student can connect his or her smartphone or tablet for recharging. At the end of each day, the external battery packs can be plugged into a recharge cart for overnight charging. A report on the evaluation of this solution in comparison with various alternatives is attached. We request you to kindly grant permission for us to convert 30 chairs/ desks in one classroom with smartphone recharge outlets to test that the proposal is useful. Each external battery pack is estimated to cost under $ 100 and the recharge cart under $ 1,800. The total money to be spent is estimated at around $ 5,000, made up of $ 100 x 30 for the external battery packs, $ 1,800 for the recharge cart and $ 200 for miscellaneous small expenses. After the proposal has been tried out in one classroom, we can evaluate what improvements are needed and then extend to other classrooms. We expect to be able to complete the project for one classroom in 6 to 8 weeks. The smartphone has become one of the most frequently used personal electronic devices for internet access. A majority of high school students carry mobile computing devices to school and would like to use it in the classroom as an aid to their study process. Many educators also see a benefit in permitting the use of smartphones and tablets in the classroom. The major limitation of a smartphone is its limited battery capacity, which requires the

Family Related Issues Essay Example | Topics and Well Written Essays - 1000 words

Family Related Issues - Essay Example The act classifies a parent as either biological, adoptive, step or foster parent or any other individual who took care of the employee when he/she was a child. The act further recognizes a son or daughter by biological means, adoption, foster, stepchild or legal ward child. The act does not imply that for a person to qualify leave under FMLA, to cater for his parent that the parent must have cared for the workers when he/she was a child (Effland & Kelly, 2009). The act recognizes a natal father as a parent even if the person did not bring up the child. A person also qualifies as a parent if the brought up the child, but they are not the biological parent. Tony was, therefore, qualified for the leave he had requested. It did not matter whether his biological father took care of him as a child; he qualifies as a parent. Q2. Explain whether the size of the business can have any effect on whether Tony is eligible for family leave under the FMLA According to FMLA, an eligible employee is an employee of a covered employer who has been in employment for a minimum of 12 months and has worked for a minimum of 1,250 hours during the 12-month period (ECFR, 2012). The employee also needs to be in employment at a worksite where the company sustains a staff of 50 or more on the payroll, and are within 75 miles of the worksite. The act does not discriminate on whether a person works part time or full time; as long as they have worked for the hours specified. For casual laborers, 52 weeks count as 12 months. The business needs to have at least 50 workers within 75 miles of the work site. The work site may be a single location or a variety of locations. Separate buildings may pass as one worksite if the buildings are close to each other; serve the same purpose and share staff and equipment. The size of the business may affect whether Tony qualifies for leave. The business need to have, at least, 50 employees in its payroll, whether they are permanent or casual. Herman’s business has over 50 employees, though not all of them are fulltime employees. The size of the business is, therefore, not a valid reason for denying Tony leave; additionally the reason that Harman gives that others will ask for leave if Tony gets leave is also not valid. Q3. Explain whether Herman can or cannot imply that if Tony takes a leave of absence under the FMLA, he may not have a job when he returns Since Tony qualifies for leave under FMLA, Tony has rights to several privileges. On return from leave, Tony should return to his previous post, regarding pay and other terms of employment. The act, however, foresees situations in which a business may restructure in order to accommodate the absence of an employee, or the employer may replace the worker (ECFR, 2012). In such cases, the employer has to reinstate the worker to a position identical to his previous place in terms of pay and terms. The duties must be similar, requiring the same skill, and bearing the same authority a nd responsibilities. The employee is also entitled to any pay increases in salary that happened while on leave; however, in the case of bonuses, it is dependent whether the bonus has ties to any achievement. In such a case, the employee will be under evaluation for qualification for the bonus. The only exemption from fulfilling these requirements is concerning aspects of the job that are not measurable or tangible. Harman is not justified in threatening to fire Tony

Operation management Case Study Example | Topics and Well Written Essays - 2750 words

Operation management - Case Study Example The input transformation output model reflects the transformational process where the inputs gained are transformed or converted into saleable outputs. The model reflects the feeding of inputs to a transformational box for being converted into outputs. An ideal Input-Output Transformational Model can be divided into different subparts such that each of the different subparts reflects on the different types of sub-operations that are being carried out to produce the final output (Mahadevan, 2009). Inputs generated are subjected to conversions such that they are transformed into effective outputs which are then marketed at a given rate. The input-output transformational model can be essentially reflected as under. The above model reflects on the different type of inputs that are fed into the transformational block to be converted into meaningful outputs. Each of the different grids reflect the different types of operational processes that are being carried out relating to the corresponding inputs to produce the desired output (Gupta & Starr, 2014). The application of the input-output transformational process related to the case study reflects that different inputs related to the raw materials pertaining to harvesting of lettuce in the fields of Lincolnshire and also the manpower involved in the harvesting, reaping, packing and sorting process. The operational activities relating to harvesting of lettuce is carried out in the fields such that the same is linked to a factory outlet where the employees operate to dress the raw materials and in making them ready to be packed and sold in the market. The transformational stage relating to the harvesting Lettuce in the fields of Lincolnshire operations pertain to the dressing of the lettuces and putting them into packets. A fraction of the manpower is involved relating to the creation of boxes or creates in which the harvested

Advanced entrepreneurship - legal and financial decisions Essay

Advanced entrepreneurship - legal and financial decisions - Essay Example Every year thousands of immigrants arrive in New York.The immigrants come with promising talent and academics,high hopes of living the American dream.Along with this,the natural increase in the population of a city resulted in a population growth rate of 5% The inhabitable land definitely does not increase with the same rate and this result into densification of population in the city centers. The two – bed room apartment, with all the traditional bulky furniture, that can be bought in no less than $500,000 can hardly accommodate a family of four, let alone allow them a comfortable living. Hence a problem exists and with it comes new opportunities to do business. The Industry: This business idea is related to furniture industry. A new product called ‘Space Saving Furniture’ is presented to Triangle Solutions as a prospective business opportunity in New York City, Manhattan and similar densely populated metropolitan areas. The art of furniture design combined with the latest technology in engineering yields a broad range of multi-purpose furniture products. The new designs are more comfortable, occupy lesser space, and can be easily modified to fit different needs throughout the day. The catalog of product includes a study table that turns into a two tier beds for kids at night, a superb sofa set that turns in to a double – bed when needed, a shelf that can be disassembled to give four small chairs if required and so on. The list includes a whole range of easy to operate furniture products that can fit into offices, bed rooms, kitchens, bathrooms, study rooms etc. and can serve at least two, if not more, functions at a time. Market Size: There are at least 2.14 million apartments in New York City alone according to a survey conducted in 2008 (DiNapoli, 2009, p. 1). Most of the residents of these apartments suffer with the problems of low accommodation. Compared with the real estate prices and monthly rents, space saving furniture is a financially feasible option for the apartment dwellers to increase their accommodation. Hence it is estimated that the product will be extremely popular with the majority of the population. Competition exists in this market as well. There are a few companies such as Resource Furniture which are already marketing the product. However, we believe that a strong marketing campaign can certainly attract the so far untapped customer base. Team Requirements: The team for this business must consist of following experts. Interior Decorator: To design the aesthetics of the furniture Product and Industrial Design Engineer: For general product design Mechanical Engineer: For material selection, load calculations and hydraulic system design etc. Marketing Manager: For devising marketing and sales strategy and its implementation Director Operations: To manage the production, inventory and general operations. Finance Officer: To manage finances. Scalability of the Product: The product is scalable over a good range of production and sales volume. Looking at the costs break down, we can observe that the product has very high initial, fixed costs and comparatively low variable cost. The initial cost includes the cost of equipments and machinery required for production and the design expenses. The variable costs include the materials, marketing and energy bills. Hence increasing the production and hence the sales volume will result in lesser payback time and greater profits. On the contrary, if low sales are forecasted for a particular product, then the costs can be reduced by using simpler production machinery instead of highly specialized machinery for each product. This machinery will have low initial and running cost but has more production time. Financials: The business can be started by establishing an office / display center at Furniture Market in New York. A small manufacturing facility will be set up close to the display center. The initial capital required for it is $2 5,000. All the

Critical Thinking and Ethics Essay Example | Topics and Well Written Essays - 250 words

Critical Thinking and Ethics - Essay Example This is because the outlook is essential to critical reasoning does not occur or may be poor quality. On the other hand, ethical reasoning equips learners and professionals the knowledge and skills to apply appropriate theories and sculpt in a better ethical framework. Moreover, ethical reasoning help individuals in verdict and resolution making skills assess the result and query inconsistence pushing for rectification (Benner, Hughes & Sutphen, 2008). Critical thinking directly relates to the ethical reasoning; this is because in many professional carriers judgment are sampled in relation to the kind of thinking employed. This takes the lead in achieving to provide quality services to avoid harm. In this regard, critical thinking in the field of medicine can be influenced by information and understanding, employing strategies such as part of learning to categorize the issues and occasion, and holistically manufacture the resource in practice (Benner, Hughes & Sutphen, 2008). For instance, some doctors and police force in the china are deviating from the rules and principles governing critical thinking and ethical reasoning. The police execute the prisoners as their constitution states. However, a few doctors are employed carry the transplant of organs of the executed prison, which are sold. In addition, the doctors completely ignore the principles of ethical reasoning which emphasis on protecting the concepts of wrong and bad (Benner, Hughes & Sutphen, 2008). In addition, Dr. Chan in the surgical department of a restricted military hospital in the Southern China explains how they extract the kidneys. They cut a section of the bone from the lower leg, and the extracted organs are placed in a special liquid, which maintain their freshness before they are taken to kidney patient (Benner, Hughes & Sutphen, 2008). Performing this act is deviating from the moral principles of critical thinking and ethical

North Coat Town- Robert Gray Analysis Essay Example for Free

North Coat Town- Robert Gray Analysis Essay The two utilities both represent the need to use the restroom and his hunger from not eating anything, as he could not afford anything. Just from stanza 1, readers can get the idea that this man is a hitchhiker. This demonstrates the life of these hitchhikers and how they would get through life day after day. In Stanza 2, the man washes himself up at a tap where he steps into mud, as there is always mud at taps. ‘Vandals Lavatory’, Grey uses the word ‘Vandal’ as he does not appreciate people vandalizing the streets to ruin the beauty of the Australian Coast Lines. The persona flushes the toilet and gets a chill whilst flushing, it’s the use of an actual toilet that gives him this chill as hitchhikers if not able to find a nearby toilet will often go in a bush. In Stanza 3, the man eats a floury apple, which he supposedly found in a supermarket bin where you find ruined goods. Grey uses personification ‘At this kerb sand crawls by’ to demonstrate that it was almost like the path was covered in sand moving slowly from the light wind about. Car after car now-its like a boxer warming up with the heavy bag, spitting air’ the cars on the street are busy going somewhere. The use of simile is comparing the cars to a boxing match, how dangerous and violent of each car passing is like a punch by a boxer. In Stanza 4, a car slows down and the man chases after it getting himself a ride. Two cars going shooting. Plastic pennants are everywhere, totally artificial and suggest high pressure selling by city petrol station. A dog is trotting down the road and someone else is hosing down their pavement, demonstrates the ordinary town life. Our image flaps in shop fronts’ Grey uses onomatopoeia. They ‘past the pink ’Tropicana’ motel (stucco with sea shells)’, recalling the Shell station in the first Stanza. As they drive outta town they pass bulldozed acres probably the site of new infrastructure being built. They’re changing the area to look more like ‘California’. ‘Pass an Abo, not attempting to hitch, outside town’, the aboriginal lives outside of town and feels no need to try and catch a ride as there is no point since no one would consider giving them a lift.

Research Paper on Smoking Essay Example for Free

Research Paper on Smoking Essay Recently there has been an abundance of media coverage regarding a public’s â€Å"war of smoking.† Recently, Washington state has begun taking vital steps to prohibit smoking in public areas in order to make Washington a better place. There are many arguments about the smoking. The health issues for the smoker and those around them increase the prices and the social unaccepted of the act. Smoking is dangerous for smoker and for the one who is around the smoker. Firstly, smoking is dangerous for smoker, when smokers are smoking, will take lung cancer. The most common form of cancer diagnosed in United States is lung cancer. Lung cancer accounts for 14% out of all cancers, and 28% out of all cancer deaths. (ALA Lung cancer Fact Sheet) According to the American Lung Association, â€Å"Cigarette smoking is responsible for an estimated 87% of lung cancer deaths, or seven out of eight† (American Lung Association). Cigarette contains more than 400toxic and 4000 chemical compounds. Nicotine is the most addictive substance in tobacco. Smoking decreases the level of oxygen from reaching the tissues, giving rise to different health problems such as strokes, heart attacks or miscarriages. Nicotine is increases cholesterol levels in the body and carbon monoxide, which decreases the amount of oxygen within the body. When cholesterol level is increase in blood, increases the chance that a heart attack. Smoking also caused of chronic coughing, shortness of breath, premature aging, recurrent infections and reduced overall fitness (Disease s Caused by Smoking). Yang2 Another example of health issues originated from smoking is emphysema. The Lung Association states that when one has emphysema, some of the air sacs in smoker’s lungs are damaged (The Lung Association). Emphysema does not develop suddenly, it comes very slowly. Years of exposure to cigarettes causes the development of emphysema. Secondly, smoking is also dangerous for non-smokers. Lung cancer is not only a trouble for the smoker, but it is also a trouble for the non-smokers. The indirect effect of smoking comes from two places; smokers breathe out from the other person smoking, and smoke from the end of a burning cigarette  (American Lung Association). The American Lung Association said, â€Å"Indirect smoke contains over 4,000 chemicals; 200 are poisons and 43 cause of cancer.†(The American Lung Association) When non-smokers are stay nearby smoker, they will get some harmful effects. Kinds of cough, nausea, headache, eye irritation, sore throat, dizziness even cancer. Workplaces alone could stop over 32,000 cancer deaths and over 75,000 heart disease deaths. According to the government, 83% of worker health complaints related to trouble with indoor air quality will decrease when workplaces become smoke-free. Constant exposure to tobacco smoke in the workplace nearly doubles the risk of having a hea rt attack. Thirdly, prices of cigarettes have been going through a dramatic increase recently. The government thinks that the increase of price will protect or even get people to quit smoking (Higher Cigarette taxes). According to several studies the increase of cigarette taxes is one of the most effective ways to decrease smoking among teenager and adults (Tobacco Free Kids). These studies show that every 10% increase in the price of cigarettes will decrease total cigarette consumption by three to five percent and decrease teenager smoking by about 7% (Tobacco free Kids). If cigarette prices were increased 10% per pack throughout the country, it would decrease the number of teenagers who become regular smokers by more than a million, saving teenager from dependence, disease and death. Studies also show that people with low income are ones that respond to the increase of prices and end up quit smoking. It is proven that smoking levels are highest among people with low incomes. Lastly, former day, people could hardly find any places without someone smoking there. Now it is prohibited to smoke in public places in many countries. While the number of smokers is increasing, the number of places they can smoke is declining. Many provinces across Canada as well as the Washington states are making it a law that all restaurants and public areas have to be 100% smoke free (U.s. Environmental). A poll conducted by Washington state today shows that 70 % of participates preferred restaurants  that were smoke-free. Over the after 45 years, smoke-free (Research about cigarette). Everyone is at risk for diseases caused from smoking when they are in public places that are not smoke-free. Even with all the evidences that prove the dangers of smoking, some businesses still look down on banning this behavior (U.s. Environmental). There is no real evidence that proves going smoke-free is bad for the business. In fact, there are many positive outcomes when a business adopts s moke-free policy. For example, maintenance cost decreases when smoke, matches, and cigarette butts are eliminated in places. Also, hardware such as equipments, floors, and furniture last longer, and of course, people’s health is freed from danger (Higher Cigarette taxes). In result, many people have different opinions about smoking. There are many characteristic proving smoke-free places are beneficial for many reasons. The government is also trying different methods to induce people to stop smoking. The great increase in cigarette prices is the main one. They figure that this will stop people not to even start smoking. Many businesses today are changing what was used to be normal in a public area: smoking. Smoke free businesses are becoming more and more common. There is no real evidence that shows that adopting smoke-free policy is harmful to businesses. It helps out the business in many areas such as maintenance. People have different opinions, but researchers prove that smoke-free public areas are good for other peoples health, not just smokers health. Eventually one day the society will be 100% smoke free. BIBLOIGRAPHY American Lung Association, â€Å"Cigarette smoking is responsible for an estimated 87% of lung cancer deaths, or seven out of eight† (http://www.lungusa.org/stop-smoking/about-smoking/health-effects/smoking.html) The American Lung Association said, â€Å"Indirect smoke contains over 4,000 chemicals; 200 are poisons and 43 cause of cancer ( http://www.lungusa.org/stop-smoking/about-smoking/facts-figures/general-smoking-facts.html) The Environmental Protection Agency (EPA) indirect smoking is known as the cause of cancer (http://www.epa.gov/smokefree/healtheffects.html) The Lung Association states that when one has emphysema, some of the air sacs in his lungs are damaged (http://www.lungusa.org/lung-disease/emphysema/) The government thinks that the increase of price will protect or even get people to quit smoking, The increase of price will make them think two times about smoking. Quitting will save them money and reduce their financial needs (http://www.aafp.org/online/en/home/publications/news/news-now/health-of-the-public/20090303smoke-tax.html) According to several studies the increase of cigarette taxes is one of the most effective ways to decrease smoking among teenager and adults, These studies show that every 10 percent increase in the price of cigarettes will decrease total cigarette consumption by three to five percent and decrease teenager smoking by about 7% (http://www.tobaccofreekids.org/what_we_do/federal_issues/federal_tobacco_taxes/) Yang6 The increase of cigarette taxes is one of the most effective ways to decrease smoking among teenager and adults(http://www.ncbi.nlm.nih.gov/pmc/articles/PMC539350/) Many provinces across Canada as well as the Washington states are making it a law that all restaurants and public areas have to be 100% smoke free(http://www.city-data.com/forum/politics-other-controversies/99626-positive-effects-non-smoking.html) A poll conducted by Washington states today shows that 70 % of participates preferred restaurants that were smoke-free. Over the after 45 years, smoke-free(http://www.ncbi.nlm.nih.gov/pubmed/9791529) Even with all the evidences that prove the dangers of smoking, some businesses still look down on banning this behavior (http://www.davehitt.com/facts/banlinksarchive2.html) Hardware such as equipments, floors, and furniture last longer, and of course, people’s health is freed from danger (http://www.cbsnews.com/stories/2010/02/10/tech/main6194761.shtml)